Leica DM R Serie Mode D'emploi page 11

Insert the switch rod (3.5) into the hole and
screw into the mount (3.4). Screw the lamp
mount without the mirror (3.2) onto the left of the
microscope.
Motorized mirror only: first fix the holder with
the short screw in the top right drill hole, then fix
the lamp mount with the 3 long screws.
Tighten the 4 screws to fix the lamp mount(s).
Lamphousing 106
only for 12 V 100 W halogen lamp (centerable in x
and y direction), focusable, two-lens collector.
Without reflector, with grooved diffusing screen,
heat-absorbing filter, Fig. 2.8, Fig. 4 and Fig. 48.17.
Besides lamphousing 106, the following light
sources can be used for incident light:
Lamphousing 106 z
for 12 V 100 W halogen lamp and gas discharge
lamps up to 100 W (Hg 50, Xe 75, Hg 100 W,
spectral lamps). Like lamphousing 106, without
diffusing screen, but with centerable and
focusable reflector and 4- or 6-lens collector.
Quartz collector on request. Fig. 5 and 48.1.
Lamphousing 252
for gas discharge lamps up to 250 W (Xe 50, Hg
200 W), centerable lamp socket, focusable 4-lens
collector, focusable and centerable reflector. In
preparation.
Microflash
for photography of fast-moving objects. Only in
connection with the electrically switchable
deviating mirror and a lamphousing (see special
instructions).
11