Leica DM R Serie Mode D'emploi page 26

Incident light reflectors*/
fluorescence filter systems*
Remove the front cover of the microscope (Fig.
19) by strong pressure upwards at an angle.
Insert the filter system (combination of
Fig. 18* Incident light reflectors* and filter systems*
1 45° BF reflector with neutral density filter* N, 2 DF darkfield
reflector, 3 Adjustment reflector (DM R series only), 4 Fluo-
rescence filter system, 5 Bertrand lens module, 6 ICR module,
7 POL system, 8 Smith reflector
2
1
N
5
Fig. 20* Incident light turret
1 Display of position in the light path, 2 Display of filter system
or reflector, 3 Marking of assembly position, 4 Filter system or
reflector or adjusting reflector
4
26
4
3
8
7
6
3 2 1
excitation filter, dichroic mirror and suppression
filter) or the incident light reflector or the
adjusting reflector (Fig. 18) into the turret (Fig. 20)
with the angled end of the dovetail guide first as
far as the stop.
Fig. 19* Front plate with incident light turret
Sticker with filter positions 1 – 4
Stickers of corresponding filter systems or reflectors
Fig. 21* Slot-on neutral filter N for BF reflector