Operating The Optional 2-Stage I.v. Pole - Stryker Power-PRO XT 6500 Manuel D'utilisation Et D'entretien

OPERATING ThE OPTIONAl 2-STAGE I.V. POlE

To use the 2-stage I.V. pole (see Figure 48.2):
1. Lift and pivot the pole from the storage position and push down until it is locked into the receptacle (A).
2. To raise the height of the pole, turn the lock actuator (B) counterclockwise and pull up on the telescoping portion
(C) of the pole to raise it to the desired height.
3. Turn the lock actuator (B) clockwise to lock the telescoping portion in place.
4. Hang the I.V. bags on the I.V. hook (D).
5. Turn the lock actuator (B) counterclockwise and slide section (C) into the bottom tube.
6. Turn the lock actuator (B) clockwise to tighten.
7. Lift up and pivot the pole down into the storage position (see Figure 48.1).
CAUTION
To avoid damage to the I.V. pole, the weight of the I.V. bags or equipment must not exceed 40 pounds (18 kg).
Figure 48.1: 2-Stage I.V. Pole Storage Position
www.stryker.com
Operation Guide
6500-109-005 REV A
C
C
D
D
B
B
A
A
Figure 48.2: 2-Stage I.V. Pole
Return To Table of Contents
English
1-55