Stryker Power-PRO XT 6500 Manuel D'utilisation Et D'entretien page 61

ATTAChING ThE PEDI-MATE® INFANT RESTRAINT SySTEM (CONTINUED)
5. Pull firmly on the end of the adjustable backrest strap and tighten it securely.
6. Insert the mainframe straps between the cot frame and the mattress. To ensure that the release button is located
toward the foot end of the cot, insert the buckle behind the litter cross brace and bring it up in front of the cross
brace. Secure the buckle around the cross brace, leaving a little slack in the strap for final adjustment (see Figure
52.3).
WARNING
To avoid accidental release of the Pedi-Mate®, and possible injury to the infant, ensure that the buckle is located away
from obstructions on the cot or accessories.
7. Verify that all of the straps are snug and fastened securely (see Figure 52.4).
Note: These are general instructions for installation of the Pedi-Mate®. Safe and proper use of the Pedi-Mate® is
solely at the discretion of the user. Stryker recommends that all users be trained on the proper use of the Pedi-Mate®
before using it in an actual situation. Retain these instructions for future reference. Include them with the product in
the event of transfer to new users.
Pedi-Mate® is a registered trademark of Ferno-Washington, Inc.
www.stryker.com
Optional Accessories
Figure 52.3: Securing the Safety Restraints on a Cot
Figure 51.4: Pedi-Mate® Strapped to a Cot
6500-109-005 REV A
Return To Table of Contents
1-61
English