Table Top Coupling Procedures; 5890/5891 Modular Table Bases; 5890/5891 Patient Transfer Safety Lock - Mizuhosi 5943 Manuel Du Propriétaire

3.0 TABLE TOP COUPLING PROCEDURES

The Jackson Spinal Surgery Top and Radiolucent Imaging Top may be coupled and
interchanged to any modular table base, as needed, to provide flexibility and procedural
capability.
NOTE: For complete instructions on the modular table base operation and functions,
please refer to the appropriate owner's manual supplied with the Modular Table Base.
A thorough understanding of the operation of the 5890 and 5891 Modular Table Base is
required before continuing.

3.1 5890/5891 Modular Table Bases

The following instructions are directed toward the use of a table top on the 5890 or 5891
Modular Table Base. These bases do not have the powered lateral tilt function.

3.2 5890/5891 Patient Transfer Safety Lock

Each 5890/5891 Modular Base is equipped with a patient transfer safety lock at both the
head and foot end columns. The patient transfer safety lock is actuated by positioning
the lever protruding out of the right side of the control box at the head end column (see
Figure 13). A second patient transfer safety lock is located on the side of the foot end
control box (see Figure 14). When engaged, the patient transfer safety lock prevents
rotation of the crossbar by locking the crossbar in the horizontal position.
Figure 13: Head end column (5890/5891 bases
shown)
MIZUHOSI 2009
Rotational friction
control
Crossbar
Patient transfer
safety lock
Disengage
motion
12
Figure 14: Foot end column (5890/5891 bases
shown)
Crossbar
Patient transfer
safety lock
Disengage
motion
NW0504 Rev. D