Chapter 2: Configuring The Touchscreen Settings - Hologic FLUENT Manuel D'utilisation

After you have been introduced to the Fluent Fluid Management System components, you are ready to configure the Touchscreen settings. This
chapter describes how to configure the Touchscreen settings.
Turning on the Fluent Fluid Management System
WARNING!
To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth.
WARNING!
Equipment should be positioned such that power cord can be easily
disconnected.
To turn the system on, perform the following steps.
1.
Connect the Power Cord to the rear of the Fluent Fluid Management System.
2. Plug the Power Cord directly into a wall outlet with the appropriate power for the Fluent Fluid
Management System.
3.
Press the top of the On/Off switch on the rear of the system to the On (|) position.
The system performs a setup routine and then displays the System Setup screen (Screen 1).
Note:
Touch the Help icon ( ) at any time to display step-by-step instructions on the touchscreen.
Configuring the Settings
When you first turn on the system, the System Setup screen is displayed.
To configure the system settings, touch the Settings icon ( ). The Settings screen is displayed as
shown in Screen 2. Use the Settings screen to:
• Select the language to display
• Adjust the touchscreen brightness
• Adjust the speaker volume for alerts
• Display additional system information
To configure the settings, do any of the following:
• To configure the Language, touch the down arrow and select the language.
• To increase or decrease the Brightness, touch the plus sign or the minus sign.
• To increase or decrease the Volume, touch the plus sign or the minus sign.
• To view last procedure information, touch Last Procedure.
After configuring the Touchscreen settings, you will want to connect the Fluent Fluid Management System components. The next chapter
describes connecting the Fluent Fluid Management System components.
English
Fluent Fluid Management System

Chapter 2: Configuring the Touchscreen Settings

Chapter 2: Configuring the Touchscreen Settings
Screen 1: System Setup Screen
Screen 2: Settings Screen
17