Adjustment And Functions; Description Of The Front Panel - Burkert 8025 Manuel Utilisateur

Adjustment and functions

5. ADJUSTMENT AND FUNCTIONS
The adjustment of the device is made in 3 modes.
Read mode
This mode makes it possible to:
• read the values of the flow rate, the output current, the main and daily totalizers;
• reset the daily totalizer.
Settings mode
This mode makes it possible to:
• adjust the display language and the parameters associated to the flow rate measurement
(units, K factor, 4-20 mA output, pulse output, relay thresholds, filter) ;
• reset both totalizers simultaneously.
Test mode
This mode makes it possible to:
• adjust the 4-20 mA output;
• read the rotation frequency of the paddle-wheel;
• simulate a flow rate to check the setttings made.
5.1.

Description of the front panel

To scroll-up the functions or
increase a digit
To scroll-down the functions or
select a digit to be modified
LED indicating relay 1 status
E-39-
Flow transmitter 8025/8035
Validation key (value or
function)
LED indicating relay 2 status