Burkert 8025 Manuel Utilisateur page 39

Installation and electrical wiring
white wire* P+
brown wire* P-
green wire* L-
red wire* L+
not used
Connection of
remote flow sen-
sor (see chap
4.2.12 )
All the cables must be
* factory wired
Current input
Fig. 38 : Pin assignment, wall-mounted version, 115/230 VAC, without relays
Shielding loop through*
fitted here
Jumper wire to be removed if the
4-20 mA output is connected
At disposal
Shieldings of the output
Connection of the pulse output in
E-37-
Flow transmitter 8025/8035
Fuse
{
cables
Connection of the pulse output in
NPN mode
Switch to select either
115 VAC or 230 VAC
Connection of
115/230 VAC
power supply
PNP mode