Adjustment - Burkert 8222 ELEMENT neutrino Manuel Utilisateur

Type 8222 ELEMENT neutrino
10.

AdjusTMENT

10.1. safety instructions
danger
Risk of injury due to electrical voltage.
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
Risk of injury due to the nature of the fluid.
• Respect the regulations on accident prevention and safety rela-
ting to the use of aggressive fluids.
Warning
Risk of injury due to nonconforming adjustment.
Nonconforming adjustment could lead to injuries and damage the
device and its surroundings.
• The operators in charge of adjustment must have read and
understood the contents of this manual.
• In particular, observe the safety recommendations and intended
use.
• The device/installation must only be adjusted by suitably trained
staff.
All manuals and user guides at all-guides.com
Adjustment
english
10.2. description of the connection
box
The box contains the terminal strip for electrical connection and
elements used for adjustment:
• a conductivity or temperature range selector associated with the
4-20 mA output
• a green LED, the device power-on indicator light
• a red LED used to :
- indicate the type of sensor installed on the transmitter (see §
- signal a problem (see §
• a push button (not used)
Red mark
Selector
Fig. 20: Connection box
11.5)
Red LED
Green LED
Push-button (not
used)
10.3)
29