Electrical Connection - Burkert 8025 Manuel Utilisateur

Technical data
Pulse output
Relay output (not UR or CSA reco-
gnized versions)
Relay output (UR and CSA reco-
gnized versions)
Sensor input (remote versions)
• signal frequency
• pulse signal (Hall)
• sinus signal (coil)
Sensor output
• power supply
3.3.2.

Electrical connection

Version
with EN 175301-803
male fixed connector
With terminal strip,
with or without cable
glands
All
polarized, potential free, 5-36 VDC, 100 mA,
proteted, voltage drop at 100 mA : 2,5 VDC
2 relays, 3 A, 230 VAC, adjustable
2 relays, 30 VAC, 42 Vpeak max. or 60 VDC max.
• 2,5 to 400 Hz
• NPN, open collector
• typical sensitivity of 35 mV peak-peak, at
252 Hz
• 10-34 VDC (V+ - 2 VDC), 1 mA max.
Type of connection
EN 175301-803 female connector (type 2508, supplied)
For the 2508 female connector with order code 438811 and the
2509 female connector (not supplied) with order code 162673,
use a shielded cable.
• external diameter of the cable: 6 to 7 mm
• cross section of the wires: 0.2 to 1.5 mm
• max. length of the power supply, current output and pulse output
connection cables: 50 m
Shielded cable (not supplied):
• external diameter of the cable: 6 to 12 mm (4 to 6 mm wenn
using a multiway seal)
• cross section of the wires: 0.2 to 1.5 mm
Cross section of the local earthing wire: 0.75 mm
E-14-
Flow transmitter 8025/8035
2
2
2