Introduction; Control Of The Delivery; General Information; Safety Information - Burkert 8025 Manuel Utilisateur

Introduction

1. INTRODUCTION
BEFORE INSTALLING OR USING THIS
DEVICE, PLEASE READ THIS MANUAL
THOROUGHLY.
1.1. Control of the
delivery
Please verify that the product is complete
and free from any damage.
To make sure you have received the right
device compare the specifications on the
type plate with those mentioned in the
ordering tables on the following pages. In
the case of an error or any problem please
contact your reseller.
1.2. General
information
This manual does not contain any warranty
statement. Please refer to our general terms
of sale and delivery.
Installation and any intervention on the
device should be carried out by properly
trained staff. If problems should occur at the
commissioning of the device, please contact
your reseller.
Flow transmitter 8025/8035
1.3.

Safety information

Bürkert manufactures a large range of flow
transmitters. As each product has been
designed to operate in various applications,
it is the user's responsibility to select the
device suited for their application, install and
maintain it properly.
This symbol within the manual means
that special attention is called to
instructions for proper installation,
proper operation and safe use of the
device.
1.4. Compliance to
standards and
directives
The transmitter type 8025 or 8035 is EC
approved and complies with the standards
and directives indicated on the EC decla-
ration of conformity.
The UL recognized devices with variable
key PU01, for the United States of America
and Canada comply with the following
standards:
• UL 61010-1
• CAN/CSA-C22.2 n° 61010-1
E-3-