Adjustment And Functionalities; Safety Instructions; Description Of The Electronic Board - Burkert 8041 Manuel Utilisateur

10. AdjusTmenT And
FuncTionAliTies
10.1.

safety instructions

danger
Risk of injury due to electrical voltage
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
WarnIng
Risk of injury due to nonconforming adjustment.
Nonconforming adjustment could lead to injuries and damage the
device and its surroundings.
• The operators in charge of adjustment must have read and
understood the contents of this manual.
• In particular, observe the safety recommendations and intended
use.
• The device/installation must only be adjusted by suitably trained
staff.
26
English
Type 8041
Adjustmentandfunctionalities
10.2. description of the electronic
board
The 8041 transmitter has 2 operating modes: Read mode and Set-
tings mode. The functions of each mode are summarised in the
following table.
Mode Functions
Read To view:
• the fluid velocity measured by the transmitter;
• the values set for the relay function.
Setting • To calibrate the transmitter.
• To set the relay parameters.
The 5 switches, the push button, the green LED, the red LED and
the bar graph are used to adjust the device (see Fig. 24 ).