Front Fork Adjusters - Ducati MULTISTRADA 1000DS S Mode D'emploi

Front fork adjusters

The front fork can be adjusted in rebound, compression
and preload.
This adjustment is performed using outer screw-type
adjusters:
1) to adjust rebound damping (fig. 32);
E
2) to adjust inner spring preload (fig. 32);
3) to adjust compression damping (fig. 33).
Park the motorcycle in a stable position on its side stand.
Turn the adjuster (1) on fork leg top with a 3-mm Allen
wrench to adjust rebound damping.
Turn adjuster (3) at the rear of the fork bottoms with a 3 mm
Allen key to adjust compression damping.
As you turn the adjuster (1), you will hear it click. Each
click identifies a setting. Adjuster (3) turns freely to give
continuous adjustment. The maximum damping is obtained
with the adjuster fully tightened to the "0" position. Start
with this position and turn counterclockwise. Count the
screw clicks, which correspond to position 1, 2 and so forth.
42
1 2
3
2 1
fig. 32
fig. 33