Ducati MULTISTRADA 1000DS S Mode D'emploi page 150

2) Check that the stop switch (1, fig. 39) is positioned to
(RUN), then press the starter button (2).
This model features servo-assisted starting.
Press and immediately release the start button (2) to use
the servo-assisted engine starting function.
When you press the button (2) the starter motor operates
automatically for a time determined by engine
temperature.
The system disengages the starter motor as soon as the
engine starts.
If the engine fails to start, wait at least 2 seconds before
pressing the start button (2) again.
Allow the engine to start without turning the throttle
twistgrip.
Notes
If the battery is flat the system automatically disables
operation of the starter motor.
Important
Do not rev up the engine when it is cold. Allow some
time for the oil to warm up and reach all points that need
lubricating.
1
2
fig. 39
E
51