Ducati MULTISTRADA 1000DS S Mode D'emploi page 156

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Movable fairing
Unscrew the four screws (1) securing the movable fairing
to the brackets with the seal (2).
Remove the movable fairing complete with the windshield
(fig. 43).
To replace the windshield, use the special torx wrench to
unscrew the screws (3) and nylon washers (4), holding the
rubber coated nuts (5) on the inside of the fairing (fig. 43a).
When fitting the new windshield, tighten the screws (2)
starting with the central screw.
Make sure that the seals (2) are correctly fitted to the
brackets, then fit the movable fairing and secure it with
the screws (1).
Tighten the screws (1).
2
1
5
4
3
E
fig. 43
fig. 43a
57

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières