Ducati MULTISTRADA 1000DS S Mode D'emploi page 159

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before refitting the side fairing, make sure that the
grommets (3) and seal (4) are correctly fitted over the pin
4
3
(5) on the inside of the side fairing (fig. 47).
Fit the left side fairing, starting from the rear, engaging the
tank pins in the grommets (fig. 47a).
Push on the side fairing at the pin (5) to engage the stop
(2) over the end of the pin.
E
Engage the front quick release (1), pushing it in and turning
5
it ¼ of a turn clockwise.
Panniers
The motorcycle has provision for fitting side panniers. The
pannier kit is available from the Ducati spare parts service.
As well as all the parts necessary for fitting, the kit also
fig. 47
contains an instruction booklet.
fig. 47a
60

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières