Ducati MULTISTRADA 1000DS S Mode D'emploi page 193

Remove the protective cap (A, fig. 80) to expose the fuses.
A blown fuse is identified by the interrupted inner filament
(5, fig. 81).
Important
Switch the ignition key to OFF before replacing the
E
fuse to avoid possible short circuits.
Warning
Never use a fuse with a rating other than specified.
Failure to observe this rule may damage the electric
system or even lead to fire.
94
A
5
IN GOOD CONDITION
INTEGRO
2
fig. 80
5
BLOWN
QUEMADO
fig. 81