Front Fork Adjusters - Ducati ST4s 2001 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Front fork adjusters

1
The front fork has rebound and compression damping
adjusters.
A
This adjustment is done using the outer adjusters:
1) (fig. 20.1) to adjust rebound damping;
2) (fig. 20.1) to adjust inner springs preload;
3) (fig. 20.2) to adjust compression damping.
Turn the adjuster (1) on fork leg top with a flat
E
screwdriver to adjust rebound damping.
To reach the adjuster (3, fig. 20.2), insert a screwdriver
2
into the passing hole on the wheel spindle at fork leg
axis.
fig. 20.1
As you turn the adjusting screws (1 and 3), you will hear
them click. Each click identifies a setting. Turn the screw
all the way in to set the hardest damping (position 0).
This will be your starting point. Now turn the screw
anticlockwise and listen for the clicks that identify setting
positions no. "1", "2" and so on.
28

Publicité

Table des Matières
loading

Table des Matières