Front Fork Adjusters - Ducati SPORTTOURING ST4s 2005 Manuel D'utilisation Et Entretien

Front fork adjusters

The front fork has rebound and compression damping
adjusters.
1
A
This adjustment is done using the outer adjusters:
1) (fig. 38) to change rebound damping settings;
1
2) (fig. 38) to change spring preload settings;
3) (fig. 39.2 - fig. 39.1) to change compression damping
E
settings.
Turn the adjuster (1) on fork leg top with a flat screwdriver
to adjust rebound damping.
2
To reach the adjuster (3, fig. 39.1 - fig. 39.2), insert a
fig. 38
screwdriver into the passing hole on the wheel shaft at
fork leg axis.
As you turn the adjusting screws (1 and 3), you will hear
them click. Each click identifies a setting.
Turn the screw all the way in to set the hardest damping
(position 0).
This will be your starting point. Now turn the screw
anticlockwise and listen for the clicks that identify setting
positions no. 1, 2 and so on.
46