Ducati MULTISTRADA 1000DS S Mode D'emploi page 157

Fixed fairing
Unscrew the six screws (1) securing the inside panel to
both sides of the fixed fairing and lift the fairing off (fig. 44).
1
Notes
When removing the panel take care not to damage
the paintwork of the fairing.
E
Unscrew the six screws (2) securing the fixed fairing to the
headlight bracket (fig. 44a).
Remove the fixed fairing
When refitting, tighten the four central screws first, then
the two side screws.
fig. 44
Fit the inside panel to the fixed fairing and align the holes.
Tighten the screws (1), taking care not to over-tighten and
damage the fixed fairing inserts.
2
2
fig. 44a
58