General Cleaning - Ducati MULTISTRADA 1000DS S Mode D'emploi

General cleaning

To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in. Use specific
products only. Prefer biodegradable products. Avoid
aggressive detergents or solvents.
E
Important
Do not wash your motorcycle right after use. When
the motorcycle is still hot, water drops will evaporate faster
and spot hot surfaces. Never clean the motorcycle using
hot or high-pressure water jets. Cleaning the motorcycle
with water cleaners may lead to seizure or severe failure of
front fork, wheel hub assembly, electric system, front fork
seals, air inlets or exhaust silencers and adversely affect
the operation of motorcycle safety features.
If needed, clean off stubborn dirt or exceeding grease from
engine parts using a degreasing agent. Be sure to avoid
contact with drive parts (chain, sprockets, etc.). Rinse with
warm water and dry all surfaces with chamois leather.
82
Warning
Loss of braking may occur immediately after washing
the motorcycle. Never grease or lubricate the brake discs.
Loss of braking power and accidents may occur. Clean the
discs with an oil-free solvent.