Changing The High And Low Beam Bulbs - Ducati MULTISTRADA 1000DS S Mode D'emploi

Changing the high and low beam bulbs

Before replacing a burnt-out bulb, make sure that the new
one complies with voltage and wattage as specified in the
"Electrical System" paragraph in page 92. Always check
for new bulb proper operation before refitting removed
parts.
fig. 55 shows the position of the low beam (LO),
high beam (HI) and parking light (1) bulbs.
To access the headlight bulbs, release the top and bottom
springs (2) under the instrument panel at the side of the
fixed fairing (fig. 56), and open the shell (3).
Notes
For the sake of clarity the headlight is shown
disassembled from the vehicle.
1
2
3
fig. 56
LO
E
HI
fig. 55
2 3
3 2
69