Front Fork Adjusters - Ducati SUPERBIKE 749R 2005 Manuel D'utilisation

Front fork adjusters

The front fork can be adjusted in rebound, compression
and preload.
This adjustment is performed using the outer screw-type
adjusters:
1) to adjust rebound damping (fig. 34);
E
2) to adjust inner spring preload (fig. 34);
3) to adjust compression damping; (fig. 35).
Park the motorcycle in a stable position on its side stand.
Turn the adjuster (1) at the top of each fork leg with a
3-mm Allen wrench to adjust the rebound damping.
To turn the adjuster (3), insert a 3 mm Allen wrench
through the hole as shown in fig. 35.
As you turn the adjusting screws (1 and 3), you will
hear them click. Each click identifies a different setting.
Turn the screw all the way for the hardest damping
(position 0). This will be your starting point. Now turn the
screw anticlockwise and listen for the clicks that identify
setting positions no. "1", "2" and so on.
40
https://www.motorcycle-manual.com/
1
2
fig. 34
3
fig. 35