Pressure Booster - Pontos AquaCycle 3000-3 Instructions De Montage

Pressure booster

The pressure booster (DEA) (P3) does not form part of the AquaCycle®.
Please refer to the documentation of the pressure booster used for information on operation and
maintenance. A potential-free contact for enabling (start/stop) the pressure booster is available on the
switch cabinet of the grey water recycling system.
Further, a pressure booster can be supplied with power optionally via an output at the switch cabinet
(400V 3AC N+PE (50Hz) fuse 20A). Please refer to the annexed circuit diagram for connection details.
Note!
Connection of the pressure booster and work in the switch cabinet are allowed to be
carried out only by an electrician.
Note!
For maintenance and other work on the pressure booster, observe the information in the
operating instructions of the pressure booster used.
Note!
The customer must ensure that the design of the pressure booster unit is in line with the
intended use.
Caution!
The pressure booster is not necessarily supplied with electricity via the Aquacycle switch
cabinet. The pressure booster may be live despite switching the main switch to interrupt
the power supply.
300108/AV/Draft
Operating Manual AC 3000-13500
27