Pontos AquaCycle 3000-3 Instructions De Montage page 67

Push the pre-fitted stage 2 towards stage 3.
Note!
Pay attention that the tanks are in alignment!
The spacing of the stages must be 30 cm on both sides.
Insert the pipe of the pump pipework of stage 2 into the compression
fitting of stage 3.
Tighten the compression fitting by hand.
Press-fit the process water pipe (filter backwash supply)
Secure the process water pipe by the pre-fitted pipe clamp.
Fit the main drain pipe (DN 100) for connection of the main pipe of
stage 3.
20 25012008/AV/Draft