Pontos AquaCycle 3000-3 Instructions De Montage page 65

Fit the sediment extractor with T-piece and spacing fixture (4) to the frame
of B2.1.
It is fitted by attaching the 2 spacing fixtures.
Now position tank 2.2 and roughly align it.
Push tank 2.2 towards tank 2.1
In so doing, pay attention that the two tanks are in alignment!
The connecting pipes of B2.1 and B2.2 have to face one another.
Note!
Pay attention that the connecting pipe with pipe clamp
is inserted.
Carefully align tank B2.2 until the spacing fixtures engage with the frame
of B2.1.
Take the flat gaskets out of the accessories bag and insert them in the
screw fittings of the sediment extraction hoses.
Place the screw fittings on the ball valves of B2.1 and B2.2 and tighten
them by hand.
18 25012008/AV/Draft