Control - Pontos AquaCycle 3000-3 Instructions De Montage

Control

The control unit monitors and controls the
automatic operation of the water recycling
system.
On the display you can:
read system status messages
•
set operating values
•
test functions.
•
Operator controls and displays
1 Four-line display - example: *1/2***Menu
name**** - Submenu 1 - Submenu 2 -
Submenu 3
2 LED green = system operates in automatic
mode. LED flashes = manual mode or
running-in phase.
3 LED red = fault – the system stops when
the signal sounds!
4 Menu step up
5 Decrease set value
6 Confirm entry
7 Increase set value
8 Menu step down
Navigation:
Using the or
•
cursor in front of the menu item
wanted.
Using the button, call the menu item.
•
In the submenu move the cursor in
•
front of the function wanted, using the
or buttons.
Activate the function with the
•
300108/AV/Draft
buttons, move the
button.
Operating Manual AC 3000-13500
Using the or
•
decrease the set value .
Save the set value with the
•
Press the button several times to go
•
to the main menu.
Code prompt:
Some procedures require you to enter a code:
Set the code using the
•
buttons.
Confirm the code with the
•
The code of the control is:
1 2 3 4
buttons, increase or
button.
and
button.
13