Pontos AquaCycle 3000-3 Instructions De Montage page 70

Fit the sediment extractor with T-piece and spacing fixture (4) to the
frame of B1.1.
It is fitted by attaching the 2 spacing fixtures.
Now position tank 1.2 and roughly align it.
Push tank 1.2 towards tank 1.1
In so doing, pay attention that the two tanks are in alignment.
The connecting pipes of B1.1 and B1.2 have to face one another.
Note!
Pay attention that the connecting pipe
with pipe clamp is inserted.
Carefully align tank B1.2 until the spacing fixtures engage with the frame
of B1.1.
Take the flat gaskets out of the accessories bag and insert them in
the screw fittings of the sediment extraction hoses.
25012008/AV/Draft 23