Information On Safety - Pontos AquaCycle 3000-3 Instructions De Montage

Information on safety

Application
The AquaCycle® water recycling system
serves exclusively to treat water from shower
trays and bath tubs to produce high-quality
process water. You can use this water for
flushing toilets, watering the garden and for
cleaning activities.
If operation and maintenance of the system is
carried out as intended, the system will supply
constantly high water quality according to the
hygienic/microbiological requirements of the EU
Directive of Dec. 8, 1975 concerning the quality
of bathing water and table 3 of Information
Sheet H 201 of Jan. 2005 issued by the
German Association for Rainwater Harvesting
and Water Utilisation (fbr).
The manufacturer and distributor is not liable
for damage caused by misuse of the system.
Requirements for use
The process water network must be
•
free from microleakages. Damage
caused by microleakages voids the
manufacturer's warranty.
The system must be installed and
•
operated according to the state of the
art. Compliance with the rules and
standards of DIN 1988 T1 to T8, DIN
1986, DIN EN 1717, DIN 2403 and
German Drinking Water Ordinance
2001 is required.
In no event may the limit values
•
specified in the technical data be
exceeded (see Operating Manual for
technical data).
The following types of wastewater must not
be introduced:
highly contaminated kitchen
•
wastewater,
wastewater from washing machines
•
and dishwashers,
wastewater containing faecal matter,
•
wastewater to which colouring matter
•
has been added (paint residues, textile
dye, hair tinting lotion),
8
Operating Manual AC 3000-13500
wastewater from medicinal mud baths,
•
very foamy wastewater.
•
Scope
Users outside the Federal Republic of Germany
should regard the safety regulations specified
here as the basis, compare them with the
locally applicable regulations and attend to any
deviations on site.
Why you should read these instructions
The instructions contain important information
for safe, proper and efficient operation of the
system. Furthermore, the information in the
installation instructions must be observed.
Compliance is required to ensure the reliability
of the system and to avoid any hazards.
If you require any additional information or if
damage occurs, please contact your distributor
or specialized dealer.
Dangers in case of nonobservance of the
instructions
Nonobservance of the safety information can
have dangerous consequences:
Danger for persons
•
Danger to the environment
•
Damage to the water recycling system
•
Nonobservance of the safety instructions
results in forfeiture of all rights to claim
damages.
Inspection and installation work
As the user, ensure that all inspection and
installation work is carried out by a service
expert or service technician.
The installation work must be carried out in
conformity with DIN 1988 T1 to T8 and DIN EN
1717.
300108/AV/Draft