Pontos AquaCycle 3000-3 Instructions De Montage page 50

Danger!
Denotes imminent risk of
electric shock. If not
avoided, death or most
severe injuries are the
consequence.
All the data and information in these
instructions have been compiled taking into
account the applicable standards and
regulations, the state of the art, and our
findings and know-how gleaned from many
years of experience.
The manufacturer does not accept any
liability for damage or loss due to:
failure to observe the instructions
failure to keep to the inspection and
maintenance intervals
use other than intended
deployment of untrained personnel
unauthorised alterations
technical modifications
use of non-approved spare parts
operation of a system not in technically
impeccable condition
In case of special models, if extra order options
are taken or in case of recent technical
alterations, the actual product contents may
deviate from the content specified and
illustrated here.
The duties agreed in the Delivery Contract, the
manufacturer's General Terms & Conditions
and Delivery Terms, and the statutory
provisions in force at the time of conclusion of
contract apply.
Warning!
Safety risk due to
incorrect spare parts.
Incorrect or defective spare
parts may detract from the
safety and cause damage,
malfunction or total failure.
Therefore:
Use the manufacturer's
original spare parts
only.
Source spare parts from the distributor or
straight from the manufacturer. The list of spare
parts is included in the system documentation.
25012008/AV/Draft
The warranty conditions are contained in the
manufacturer's General Terms & Conditions.
These instructions are protected by copyright
and are intended solely for internal purposes.
In the absence of the manufacturer's approval,
passing of the instructions to third parties,
reproduction of all or part of the instructions in
any manner or form, and any use and/or
communication of the contents are not
permitted other than for internal purposes.
A liability to pay damages is incurred by any
acts of noncompliance. Further claims remain
reserved.
The system was designed and manufactured
by Pontos GmbH.
3