Operation; Control And Display Elements - Pontos AquaCycle 900 Instructions De Service

Operation

The control system monitors and controls the
automatic operation of the water recycling facil-
ity.
On the display you can:
Read off messages about the facility condi-
•
tion.
Set the operating values.
•
Test the functions.
•

Control and display elements

1 Four-line display - example: *1/2***Menu
name**** - Submenu 1 - Submenu 2 -
Submenu 3
2 LED green = facility is working in automatic
mode. LED blinking = manual mode or
breaking-in phase.
3 LED red = malfunction – the facility is stan-
ding if a signal sounds!
4 Menu up.
5 Reduce setting.
6 Confirm input.
7 Increase setting.
8 Menu down.
EN10
Operating instructions AquaCycle 900
Navigation:
Use the buttons
•
cursor in front of the desired menu item.
Use the button
•
In the submenu, use the buttons
•
to move the cursor in front of the de-
sired function.
Use the button
•
Use the buttons
•
or reduce the setting.
Use the button
•
Press the button
•
change to the main menu.
or to move the
to call the menu item.
or
to activate the function.
or to increase
to save the set value.
several times to
050608