Product Description; General Technical Characteristics - Rohde ELS-N Manuel D'utilisation Original

2.

Product description

2.1.

General technical characteristics

Property
Design
Type
Form of energy
Equipment
Option
Voltage
Connection
Heating elements
Firing chamber
heating
Heating zones
(control system)
Firing chamber
insulation
Controller
Thermocouple
Housing
Kiln door
Paint colour
Permissible ambient
temperature
Relative humidity
Firing chamber
atmosphere
Firing chamber
ventilation
Table 2: General technical characteristics
Description
Frontloader
ELS series
Electrical
Kiln floor with Ergo Load System (ELS)
eDrive
3 N PE 400 V AC
• CEE 16 A
• CEE 32 A
• CEE 63 A
• Permanent connection
Kanthal heating elements in grooved
bricks or on a support rod
5-sided
1-zone control
3-layered
TC 304
TC 504
Type S
• Torsion-resistant steel construction
•
In-frame ventilation made of
stainless steel
•
Stainless steel door frame
Swing door
• Turquoise blue RAL 5018
• Light grey RAL 7035
-5°C to +30°C
Less than 80%
Oxidising
•
Air supply slide
•
Exhaust air flap handle
Remark
•
Pull-out kiln floor
• Can be loaded from 3 sides.
•
Comfort Stop (cushioned end positions)
•
Brake function and floor lock
•
Adjustable truck seal
• Low-maintenance roller system
•
Guided electrical cabling using an energy chain
• Electrically extendable and retractable kiln floor
•
The kiln is equipped with a switch cabinet,
regardless of its power connection and
performance values.
Special voltages for all models and all EU networks
possible on request!
Type depends on the version.
Type depends on the version.
Heating elements in the kiln door, floor, back wall
and side walls.
3-zone control optionally available
Optionally available with an ST 411, ST 630 or
ST 632 controller.
Low external temperatures and high corrosion
protection
• Sealable and lockable
•
Opening angle approx. 180°
Type depends on the version.
Non-condensing
• Both can be controlled from the front of the kiln
using a remote control.
•
Central exhaust air socket
• Can be optionally controlled automatically by the
control system.
• Exhaust air can optionally be discharged via an
exhaust air hood (exhaust air hood optionally
available).
76 / 492 - EN -