Customer Service; Maintenance Contract; Repairs; General Safety Information - Rohde ELS-N Manuel D'utilisation Original

12.5. Customer service

NOTE
The kiln, equipment and components should be checked and serviced once a year by
customer service.

12.6. Maintenance contract

INFORMATION
Contact ROHDE GmbH for advice and to agree on a maintenance contract for your ROHDE
product(s).

13. Repairs

Follow the repair instructions listed below - these are the prerequisites for the perfect operation and long service life of
the kiln.

13.1. General safety information

DANGER
Risk of serious personal injury or death and material damage to the kiln by touching live parts
when operating.
⇒
⇒
⇒
⇒
⇒
⇒
⇒
⇒
⇒
DANGER
Risk of severe personal injury and property damage and even death while working on or in the
kiln if there is still residual energy in the kiln.
Note that certain modules in the switch box can still be supplied with voltage, even if the main
switch has been switched off for work.
⇒
⇒
⇒
⇒ Regular maintenance by the customer service is strongly recommended.
⇒ There is also the option of a maintenance contract.
Only carry out repair work when the kiln is in a safe and de-energised state.
Trip all necessary circuit breakers to avoid accidentally touching live parts.
Pull out the power plug or switch off the electrical power to the equipment.
Before starting work on live parts of the electrical systems and equipment, ensure that
they are voltage-free and remain so for the duration of the work.
Before starting work, you must check whether the kiln can still be switched on.
Put up warning signs that indicate work is being carried out.
Let hot kiln components cool down before starting work.
Wear protective gloves when working on the kiln.
After completing the work, check all loosened connections and check that the cables
are firmly seated, and that the protective equipment is functioning properly.
Note that the residual voltage can remain in the kiln for several minutes.
Switch off the kiln completely.
Check that the kiln is actually de-energised before starting work.
122 / 492 - EN -