Rohde ELS-N Manuel D'utilisation Original page 112

eDrive is an electric comfort drive for the ELS kiln floor. The kiln floor is retracted and extended electrically and brakes
with a damping effect.
⇒ The kiln is then equipped with a switch cabinet, regardless of its power connection and its performance values.
⇒
The controls for extending and retracting the ELS kiln floor are located on the switch cabinet.
The controls work on the principle of 2-hand operation, i.e., one hand operates the controls for extending and
retracting and the other hand operates a key to release the electric drive.
Figure 20: ELS eDrive (switch cabinet & controls)
The controls are assigned as follows:
Switch cabinet side
Retract
floor
or
Figure 21: eDrive controls
The 2-hand operation means 2 keys must always be pressed with the left and right hand so that the ELS kiln floor can
be extended and retracted electrically:
Manual
Left hand
Operates the "Retract floor" and "Extend
floor" keys on the side of the switch
L
Figure 22: 2-hand operation
*Depending on the version, the switch cabinet with the control keys can also be mounted on the right of the kiln, in which case it is operated using
the opposite hands.
Keys for extending and
retracting
"Release" key
Switch cabinet front
Extend
floor
Operation
cabinet.
111 / 492 - EN -
Release
Manual
Right hand
Operates the "Release" key on the front
R
Operation
of the switch cabinet.