Notes On Exhaust Gas Temperature; Optional Equipment; Edrive - Rohde ELS-N Manuel D'utilisation Original

⇒
The heat loss from the kiln casing should be taken into account when designing the room ventilation (supply air
and exhaust air).
⇒
The kiln can optionally be equipped with an exhaust air hood to remove the exhaust air from the firing chamber.
⇒ The exhaust hood works in the same way as the exhaust air socket.
Cool ambient
air is drawn in
Figure 19: Exhaust air connection using an exhaust air hood
9.6.3.

Notes on exhaust gas temperature

The exhaust gas temperature depends on various factors. For example, with a glaze firing at 1150°C, the ceramic
exhaust pipe can reach temperatures of 600-700°C.
This exhaust gas temperature is immediately cooled by mixing with the ambient air:
•
After 1 m of the pipeline, the exhaust gas temperature is still approx. 110 °C
• After 2 m of the pipeline, the exhaust gas temperature is still approx. 60 °C

10. Optional equipment

10.1. eDrive

WARNING
Risk of serious personal injury or property damage:
⇒
⇒
WARNING
Risk serious personal injury or property damage due to overloading of the ELS kiln floor.
⇒
Exhaust air hose/exhaust
pipe Ø 150 mm (optional
accessory)
Exhaust air hood
(optional accessory)
Exhaust air
Incorrectly stacked and falling ware can cause injuries or damage to the kiln or
personnel.
The manufacturer assumes no liability for personal injury or property damage.
Never exceed the maximum load weight of 40 kg per 100 litres of kiln volume!
110 / 492 - EN -
Cool
ambient air
is drawn in