Publicité
ELECTRIC STARTING SYSTEM (TT-R90E)
2
1
7
8
M
ELECTRIC STARTING SYSTEM
(TT-R90E)
STARTING CIRCUIT CUT-OFF SYSTEM
OPERATION
If the main switch is set to "ON", the starter
3
motor can only operate if the following condi-
tion is met:
• The transmission is in neutral (the neutral
4
The starting circuit cut-off relay prevents the
starter motor from operating when this condi-
tion has not been met. In this instance, the
5
starting circuit cut-off relay is open so current
cannot reach the starter motor. When the
above condition has been met the starting cir-
cuit cut-off relay is closed and the engine can
be started by pressing the start switch.
6
1 Battery
2 Main fuse
3 Main switch
4 Start switch
5 Starting circuit cut-off relay
6 Neutral switch
7 Starter relay
8 Starter motor
6 - 7
switch is closed).
WHEN THE TRANSMISSION IS
IN NEUTRAL
–
+
ELEC
Publicité
