Publicité
FRONT WHEEL AND REAR WHEEL
5 - 7
Front wheel
1. Install:
• Wheel bearing 1
• Spacer 2
• Wheel bearing 3
• Oil seal 4
New
NOTE:
• Apply the lithium soap base grease on the
wheel bearing and oil seal lip when installing.
• Install the wheel bearing so that the enclosed
side is facing outward.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Left side of wheel bearing shall be installed
first.
• Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Brake shoe plate assembly
• Collar set 1
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
3. Install:
• Front wheel
NOTE:
Make sure that the slot a on the brake shoe
plate with the stopper b on the front fork outer
tube.
4. Install:
• Brake cable
NOTE:
Brake camshaft lever side of brake cable shall
be installed first.
CHAS
Publicité
