Publicité
2. Install:
• Grip (left) 1
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface a
with a lacquer thinner.
• Install the grip (left) to the handlebar so that
the line b between the two arrow marks
faces straight upward.
3. Install:
• Grip (right) 1
• Collar 2
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the tube guide surface a
with a lacquer thinner.
• Align the mating mark b on the grip (right)
with the slot c in the tube guide.
b
c
4. Install:
• Screws (throttle housing)
After tightening the screws, check that the
throttle grip 1 moves smoothly. If it does
not, retighten the bolts for adjustment.
5 - 16
HANDLEBAR
Apply the adhesive to the handlebar 2.
Apply the adhesive on the tube guide 3.
WARNING
CHAS
Publicité
