Publicité
FUSE INSPECTION (TT-R90E)
3. Replace:
• Blown fuse
Replacement steps:
• Set the main switch to "OFF".
• Install a new fuse of the correct amperage.
• Set on the switches to verify if the electri-
cal circuit is operational.
• If the fuse immediately blows again, check
the electrical circuit.
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
• Rear fender
• Seat
3 - 31
INSP
ADJ
Amperage
Items
rating
Main fuse
Q'ty
10 A
1
Publicité
