Publicité
FRONT WHEEL AND REAR WHEEL
5 - 8
5. Install:
• Brake cable holder 1
7 Nm (0.7 m · kg, 5.1 ft · lb)
6. Adjust:
• Brake lever free play
Refer to "FRONT BRAKE ADJUST-
MENT" section in the CHAPTER 3.
Wheel drive hub assembly
1. Install:
• Bearing 1
• Oil seal 2
New
• Collar 3
• Sprocket shaft 4
• Driven sprocket 5
• Lock washers 6
• Nuts 7
• Bolts 8
25 Nm (2.5 m · kg, 18 ft · lb)
NOTE:
• Install the oil seal with its manufacture's
marks or numbers facing outward.
• Tighten the bolts in stage, using a crisscross
pattern.
• Bend the lock washer tab.
CHAS
New
Publicité
