Publicité
ENGINE OIL LEVEL INSPECTION
0
10
30
50
70
90 110 130
È
-20 -10
0
10
20
30
40
ENGINE OIL LEVEL INSPECTION
1. Start the engine, warm it up for several
2. Place the machine on a level place and
3. Remove:
4. Check:
NOTE:
When inspecting the oil level, do not screw the
dipstick into the oil tank. Insert the gauge
lightly.
(For USA and CDN)
˚F
É
50
˚C
CAUTION:
• Do not add any chemical additives.
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
• Do not allow foreign material to enter the
crankcase.
3 - 6
minutes, and then turn off the engine and
wait for five minutes.
hold it up on upright position by placing the
suitable stand under the engine.
• Dipstick 1
• Oil level
Oil level should be between maximum a
and minimum b marks.
Oil level is low → Add oil to proper level.
Recommended oil:
At –10 °C (10 °F) or higher È:
Yamalube 4 (10W-30) or SAE
10W-30 type SE/SF/SG motor
oil
At 5 °C (40 °F) or higher É:
Yamalube 4 (20W-40) or SAE
20W-40 type SE/SF/SG motor
oil
INSP
ADJ
Publicité
