Symbols Used; Transport And Storage - Biral FEX Instructions D'installation Et D'entretien

98 english
|
2

Symbols used

Warning
The safety instructions contained in these installation and operating instruc-
tions which, if not observed, could lead to hazards for persons, are specifically
highlighted with the general "Safety mark according to DIN 4844-W9" danger
symbol.
Warning
Risk posed by electrical voltage.
Failure to observe these safety instructions may result in electric shock, serious
injury or even death.
Warning
Hot surfaces: Risk of injury or burns!
This symbol can be found on safety warnings which, if ignored, mean that the
machine risks being damaged and its functions impaired.
This symbol indicates advice or information that assists your work and en-
sures safe operation.
This symbol indicates information relevant for ATEX.
3

Transport and storage

3.1 Transport
The pump's intrinsic weight is considerable and it must therefore be transport-
ed using the handles/lugs provided on the pump and using suitable lifting and
conveying equipment.