Using The Web Application - Porsche Mobile Charger Plus Mode D'emploi

Using the web application

Opening the web application
Opening the charger's web application
b The end device and charger are in the same net-
work via a PLC connection.
1. Open the browser.
2. Enter the host name of the charger in the brows-
er's address bar. The host name is in the letter
containing access data.
– or –
Enter the IP address of the charger in the
browser address bar. The IP address was as-
signed by the DHCP server when your device and
the charger were paired, and can be seen in your
router settings.
Forwarding to the web application
Information
Depending on which browser you are using, the web
application will not open immediately; instead infor-
mation about the browser's security settings will be
displayed first.
1. In the warning message displayed in the
browser, select Advanced.
2. In the following dialog window, add the SSL cer-
tificate as an exception.
�� The SSL certificate is confirmed and the
Web Application is opened.
Connections
Powerline Communication (PLC)
If the charger is connected with a PLC network, the
network information, e.g.host name, MAC address, IP
address, is displayed here.
Energy manager
To ensure the energy manager takes over control
of charging, the charger (EEBus device) and energy
manager must first be connected to one another.
Establishing a connection with an unknown energy
manager must be performed in open mode directly
on the charger and in the Web Application of the
energy manager.
Information
If the charger is in private mode, the connection to
the energy manager must also be confirmed in the
charger's web application.
g See chapter "Adding an EEBus device" in the web
application instructions of the Porsche Home Energy
Manager.
g Please refer to the operating and installation in-
structions for the Porsche Mobile Charger Plus.
Displaying the connection to the energy manager
in the web application:
e Navigate to Connections e Energy manager in
the charger's Web Application.
�� The connected energy manager is displayed
with the status Energy manager connected.
Device information of the energy manager is
visible.
Open mode
On delivery, the charger is configured to be in open
mode. This means that the energy manager is auto-
matically found and connected in the home network.
The following prerequisites must be met for auto-
matic pairing with the energy manager:
b The charging status ENERGY MANAGER is se-
lected on the charger.
b The charger and energy manager are in the same
PLC network.
b The charger was added as an EEBus device in the
Web Application of the energy manager.
e
We recommend only switching to private mode
after you have started up the device for the first
time.
Activating private mode
1. Navigate to Connections e Energy manager in
the charger's Web Application.
2. Activate Private mode.
Confirming the connection to the energy manager
b The charger and energy manager are in the same
network.
b Private mode is activated.
b Connection to the charger was already confirmed
in the energy manager's web application.
1. Navigate to Connections e Energy manager in
the charger's Web Application.
�� The energy manager is displayed in the
Available energy managers list.
2. Select energy manager and expand.
3. Select Pair devices.
Operation
27