Resetting To The Factory Settings; Overview; Possible Uses - Porsche Mobile Charger Plus Mode D'emploi

Serial number of the charger
The serial number of the charger can be found in the
following places:
– In the letter containing access data after the
designation Serial Number
– On the identification plate (on the back of the
control unit), after the abbreviation SN
–
In the web application: Web Application Set-
e Service e Device information
tings

Resetting to the factory settings

Activating this function will delete all your settings.
In addition, all passwords will be set to the initial
passwords in the letter containing access data.
Information
This function is deactivated in the charger by default.
In order to execute this function on the charger,
you need to enable it in the Web Applikation (Set-
e System e Activate reset to factory set-
tings
tings).
1. Simultaneously press the CHARGE STATUS but-
ton and the MULTIFUNCTION BUTTON and hold
for at least 5 seconds. At the same time, the
CHARGER light indicator flashes white.
2. As soon as the CHARGER light indicator stops
flashing, release the MULTIFUNCTION BUTTON,
but continue holding the CHARGE STATUS but-
ton for another 2 seconds.
3. Press and hold the MULTIFUNCTION BUTTON
again for 5 seconds.
At the same time, the CHARGER light indicator
flashes white.
�� The charger is reset to the factory settings.
At the same time, the light indicators light
up green.
When the self-test has successfully been
completed, the charger is ready for opera-
tion.
A reset to factory settings is also possible using the
web application or at an authorized Porsche dealer.
Porsche recommends an authorized Porsche dealer
as they have trained technicians and the necessary
parts and tools.
For information on the Web Application, refer to the
instructions at https://www.porsche.com/interna-
tional/ aboutporsche/e-performance/help-andcon-
tact/
For other languages, select the desired country ver-
sion of the website.

Overview

Possible uses

The charger can be used in standalone mode via its
buttons. The Powerline-Communication function of
the charger enables it to connect to the home net-
work. The existing power grid is used to establish a
local network for data transfer. The PLC connection is
a prerequisite for operation using the charger's Web
Application or for control via the energy manager.
Possi- Operation of the Porsche Mo-
ble uses bile Charger Plus
Variant Operation takes place directly
1 on the charger (standalone
mode).
Variant Operation takes place via
2 the charger's Web Application
(without energy manager). A
home network (PLC connec-
tion) is required for connec-
tion.
Variant Operation is via the Web Ap-
3 plication of the energy man-
ager. The energy manager is
registered as a client in the
PLC network.
Variant Operation is via the Web Ap-
4 plicationof the energy man-
ager. The charger and energy
manager connect to one an-
other directly via the DHCP
server of the energy manager.
Overview
Wher
e?
g
p. 10
g
p. 10
g
p. 10
g
p. 11
9