Getting Started - Porsche Mobile Charger Plus Mode D'emploi

Setup
g Refer to the operating instructions of the PLC mo-
dem.
Connecting the charger to the energy man-
ager
Connecting on the charger
Once the charger has connected to the PLC network,
it attempts to connect to the energy manager in open
mode.
b The charger has established a PLC connection.
b The charger and energy manager are in the same
PLC network.
–
The energy manager is known (Status 3):
No action is necessary. The charger automati-
cally connects to the energy manager.
– The energy manager is unknown (Status 4):
Add the charger as an EEBus device in the Web
Application of the energy manager.
If the ENERGY MANAGER light indicator lights up
green, the energy manager is successfully connected
(Status 5).
The energy manager settings (e.g. charging current,
overload protection and optimized charging) are ap-
plied to the charger.
g Connection to the charger is described in the sec-
tion "Adding an EEBus device" in the web application
instructions of the Porsche Home Energy Manager.
g Refer to the operating instructions of the energy
manager.
22
Establishing connection in the Web Application of
the charger
e
If the charger is in private mode, an unknown
energy manager must be added in the charger's
Web Application (Connections e Energy man-
ager).
g For information on the web application, re-
fer to the instructions at https://www.por-
sche.com/international/ aboutporsche/e-per-
formance/help-andcontact/
For other languages, select the desired country
version of the website.
Re-establishing connection to the energy
manager
If the energy manager charge status is activated,
the charger automatically attempts to connect to the
most recently used PLC network.
Hotspot
If it is not possible to integrate into a home network,
the charger can activate a hotspot, thereby estab-
lishing a connection to the web application on the
charger.
e
To activate a hotspot, click on Activate hotspot.
Once a hotspot has been activated, the symbol
will appear in the status bar.
Information
When using Android systems, the connection may
have to be confirmed separately in order for a hotspot
connection to be established.

Getting started

Establishing a Connection to the Charger
Before the charger and the Web Application can be
used for daily purposes, the charger must first be set
up. Next, a connection must be established between
the end device (PC, tablet or smartphone) and the
charger.
g For information on establishing the PLC connection,
please refer to the operating and installation instruc-
tions for the Porsche Mobile Charger Plus.
Requirements for the First Use of the Web
Application
You should have the following information to hand
when using the Web Application for the first time:
–
Letter containing access data Porsche Mobile
Charger Plus for logging into the Web Applica-
tion of the charger.
–
Access data for your domestic network
–
Access data for the user profile (to link it with
the Porsche ID)
The following browsers are supported by the Web
Application:
–
Google Chrome Version 57 or higher (recom-
mended)
–
Mozilla Firefox Version 52 or higher (recom-
mended)
–
Microsoft Internet Explorer Version 11 or higher
–
Microsoft Edge
–
Apple Safari Version 10 or higher