Access To Fuses - SBI CAMBRIDGE II Mode D'emploi

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/17/2019 7:40:40 AM
1 - MANUAL ENGLISH

10 ACCESS TO FUSES

WARNING: UNPLUG THE STOVE BEFORE CHANGING THE FUSES.
All fuses are located inside the stove on the main electronic board. The main board is located on the
right hand side of your stove. Unplug your stove, remove the right hand side decorative panel. Next,
remove the two screws holding the panel and rotate the panel.
64
Stove Builder International Inc. | 48202 | Rev: May 31 2019 10:15AM | Uncontrolled Copy
(64 OF 91)
LETTER FUSE FUNCTION
A MAIN BOARD FUSE
B CONVECTION BLOWER
C COMBUSTION BLOWER
D
EXHAUST BLOWER
E TOP AUGER #1
F BOTTOM AUGER #2
G IGNITOR
Cambridge II and Osburn 3000C Pellet Stove Installation and Operation Manual
AMPERAGE
7.5A
5A
3A
3A
3A
3A
5A
Page 71 of 864