SBI CAMBRIDGE II Mode D'emploi page 194

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/17/2019 7:40:40 AM
TESTING INFORMATION
Test Report 103819589MTL-001
The SBI Model Osburn 3000C Wood Pellet Fuel Room Heater has been found to be in compliance with the
applicable performance requirements of the following criteria: "CSA B415.1-2010(R2015) – Performance Testing
of Solid-Fuel-Burning Heating Appliances", ASTM E2515-2011-Standard test method for determination of
particulate matter emissions collected by a dilution tunnel, ASTM E2779-2010- Standard test method for
determining particulate matter emissions from pellet heaters.
In virtue of similarity between the two models, this testing will also cover for recognition of the Cambridge II
model.
Testing was performed at the client's facility located in St-Augustin, Quebec. QC.
To make this SpecDIRECT document less voluminous, a number of appendices to the attached report were
omitted. They can be found in EPF under the identified project number as well as in documentation supplied to
EPA..
Stove Builder International Inc. | 48202 | Rev: May 31 2019 10:15AM | Uncontrolled Copy Page 781 of 864