SBI CAMBRIDGE II Mode D'emploi page 212

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/17/2019 7:40:40 AM
TEST REPORT 103819589MTL-001
TEST REPORT FOR STOVE BUILDER INTERNATIONAL INC.
Report No.: 103819589MTL-001
Date: 03/26/19
SECTION 2
SUMMARY OF TEST RESULTS
The appliance tests resulted in the following performance:
For INTERTEK B&C:
COMPLETED
BY:
TITLE:
SIGNATURE:
DATE:
aaa:bbb
SECTION 3
TEST METHOD(S)
The specimen was evaluated in accordance with the following:
ASTM E2515-11- Standard Test Method for Determination of Particulate Matter Emissions
Collected by a Dilution Tunnel
ASTM E2779-10 - Standard Test Method for Determining Particulate Matter Emissions from
Pellet Heaters
CSA B415.1-10 - Performance Testing of Solid-Fuel-Burning Heating Appliances
SECTION 4
MATERIAL SOURCE
A sample was submitted to Intertek directly from the client. The sample was not independently
selected for testing. The test unit was handed to the Intertek representative at client's facility in
St-Augustin-de-Desmaures, Quebec. The unit was inspected upon receipt and found to be in
good condition. The unit was set up following the manufacturer's instructions without difficulty.
Version: 05/10/17
Stove Builder International Inc. | 48202 | Rev: May 31 2019 10:15AM | Uncontrolled Copy
Particulate Emissions: 0.96 g/hr
Carbon Monoxide Emissions: 0.16 g/min
Heating Efficiency: 76% (Higher Heating Value Basis)
Claude Pelland, P.E.
Manager B&C,
Intertek, Quebec
03/26/19
Page 3 of 20
(3 OF 20)
Lachine, Quebec, Canada, H8T 3J1
Telephone: (514)631-3100
Facsimile: (514)631-1133
www.intertek.com/building
REVIEWED BY: Brian Ziegler
Technical Team Leader -
TITLE: Hearth
SIGNATURE:
DATE:
03/26/19
1829, 32nd AVenue
GFT-OP-10c
Page 799 of 864