Certificate Of Conformity - SBI CAMBRIDGE II Mode D'emploi

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/17/2019 7:40:40 AM
CERTIFICATE OF CONFORMITY - SBI - MODELS CAMBRIDGE II AND
OSBURN 3000C EMISSIONS AND EF...
This is a certificate of
conformity to certify that the
bearer has successfully
completed the requirements
of the above scheme which
include the testing of
products, the initial
assessment, and are subject
to continuing annual
assessments of their
compliance and testing of
samples of products taken
from production (as
applicable to the scheme)
and has been registered
within the scheme for the
products detailed.
www.intertek.com
The certificate and schedule are held in force by regular annual surveillance visits by Intertek Testing Services NA, Inc. and the reader or user should contact Intertek to validate its
status. This certificate remains the property of Intertek Testing Services NA, Inc. and must be returned to them on demand. This Certificate is for the exclusive use of Intertek's Client
and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement.
Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this certificate. Only
the Client is authorized to permit copying or distribution of this certificate and then only in its entirety. Use of Intertek's Certification mark is restricted to the conditions laid out in the
agreement. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory
Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of
production quality control and do not relieve the Client of their obligations in this respect.
Stove Builder International Inc. | 48202 | Rev: May 31 2019 10:15AM | Uncontrolled Copy

Certificate of Conformity

Emissions – Wood Burning Pellet
Stove
EPA 40CFR Part 60, subpart AAA, ASTM E2779-2010, ASTM E2515-2011, CSA B415.1-2010
Certificate number: WHI19 – 21514311
Organization:
Company Name: Stove Builder International inc.
Address: 250 de Copenhague
City, State: St-Augustin-de-Desmaures
Zip Code: G3A 2H3
Country: Canada
Product: Model CAMBRIDGE II & OSBURN 3000C
Maximum Output: 23,016 Btu/hour
Weighted Average Emissions Rate:
Weighted Average CO Emissions Rate: 0.16 g/min
76% HHV
Weighted Average Efficiency:
Test Fuel Type:Premium Grade Wood Pellets
Compliance: Certified to comply with 2020 particulate emissions standard.
Report Number: 103819589MTL-001
Certification body: Intertek Testing Services NA, Inc.
Initial registration: March 26-2019
Date of expiry: No expiry date
Issue status: 1
Charles Meyers
Certification Manager
Name
Registered address:
Intertek Testing Services NA, Inc. 545 E. Algonquin Rd. Arlington Heights, IL 60005 USA
0.96 g/hr
Signature
03/26/2019
Date
Page 4 of 864