Before You Begin; Setting The Language And The Clock; Automatic Shutoff (Clock) - Atag CX4411T Mode D'emploi

BEFORE YOU BEGIN

Setting the language and the clock

When the power is fi rst supplied to the oven, you must set the language and the time.
1 Turn the MULTI-FUNCTION
SELECTOR to set the language. Press
Start to confi rm.
3
Example: to set 1:30.
Turn the MULTI-FUNCTION
SELECTOR to set the hour.
5
Turn the MULTI-FUNCTION
SELECTOR to set the minutes. Press
Start to fi nish setting the clock.
'30' will stop blinking.

Automatic shutoff (clock)

If the knobs of the oven are not operated for more than 30 minutes, the display will turn off
automatically for energy saving reasons. By operating any key, the display is switched on again.
If desired, this function can be turned off (see page 17; 'Auto shutoff ').
EN 14
2 Now you have to set the right time.
The '12' will blink.
4
Press Next to confi rm. The '00' will
blink.
6
The display shows the time of day.
The appliance is now ready to use. If
you want to change the time later on,
you can do this by pressing the Menu
and choose 'Time' by turning the
MULTI-FUNCTION SELECTOR and
press the Next. Then follow step 2-6
as described on this page.